AK110, Complete w/Sensors

AK110, Complete w/Sensors
The most highly advanced single-pool controller in the industry! With its connection options the AK110 controller provides unsurpassed water management to any aquatic facility operator, fulfilling all requirements of the facilities pool, spa or other water features. Programmable features complete the AK110 package with continuous monitoring of pH, ORP, disinfectant levels, temperature and flow rate. The bidirectional control of the AK110 allows water chemistry changes to be made immediately from a computer anywhere in the world.
 
Standard Features

• pH, ORP and temperature sensors

• Programmable pH, ORP and temperature set points
• Programmable chemical feed cycle ON and OFF (MIX) times
• Programmable proportional feed
• Programmable acid, base or CO 2 feed for pH control
• Relay configuration shortcuts with Acu-Trol  Wizards
• Flow cell with built-in flow switch, shut-off valves, inlet strainer and sampling port
• Records up to 30 days of sensor data internally in 1 or 2 hour recording intervals
 
Options

AcuPort Connectivity

Ethernet, WiFi or RS422/485

 

Wireless Communication

Wireless GPRS where phone lines are not accessible

 

AcuManage II Website

Notification alarms and sensor readings

AcuManage II available via wireless or AcuPort communication only

 

AKColor Sensor

The AKColor colorimetric sensing system measures PPM of free chlorine with the DPD (N, N-DIETHYL-P-PHENYLENEDIAMINE) test

 

Absorb It

The Acu-Trol’s Absorb It system for the use of CO 2   for optimal pH and alkalinity control

 

Optical Level Sensor

Measurement and automatic control of water level

 

Digital Flow Sensor

Displays flow rate in gallons per minute

 

High Amp Relay (HAR1)

Control of high current loads

 

Real Time Clock

Time and day stamps for sensor data logging

 

Premounting

Mounted on easy to install polypropylene predrilled board

 

Features

 

Sensors

The AK110 is capable of measuring ORP, pH, free chlorine, temperature and flow rate.

 

Data Recording

Up to thirty (30) days of data storage. In the absence of power the AK110 will retain programming information, calibration and recorded data.

 

Alarms

Alarms are activated by sensor measurements and will communicate every two hours until alarm is cleared.

 

pH Alarms

pH set point ± .5

Overfeed disables pH feed

Flow switch disables pH feed

High pH disables disinfectant feed

 

ORP Alarms

ORP set point ± 75mV

Overfeed disables disinfectant feed

Flow switch disables disinfectant feed

 

Communication

The AK110 communicates with AcuManage II and the AcuCom software package. Optional modem modules provides wireless or wired communications.

 

Security

Password limits access to ensure programming protection.
Details
Part# AK110PS-A
 
Our price: $2838.44
Options
Quantity

 

Share

: *
: *
: *
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):