The AK600
is the most advanced multiple pool controller available, providing the ultimate in equipment room automation. Up to sixteen output relay combinations, configurable for up to six types of control. The AK600 can be customized for any facility, with voltage-configurable control relays and bidirectional control, database information options accessible via direct link, dial-up, wireless modem and ethernet connectivity. With control of chemicals, pumps, filters, heaters, air handlers, chloramine reduction systems and the ability to interface with building management systems for up to 3 bodies of water, the AK600 completes an aquatic facility.
Standard Features
AcuCom
Software
Multiple pool control for 1, 2, or 3 pool configurations
Programmable pH, ORP, and temperature set points
Programmable proportional feed for precise chemical feed
Programmable acid, CO
2
, or base feed for pH control
Relay configuration shortcuts with Acu-Trol
Wizards
Auto backwash filters for up to two bodies of water
Flow cell with built-in flow switch, shut-off valves,
inlet strainer and sampling port
16 relays with three (3) voltage configurations
Options
AcuManage II
Website
Notification alarms and sensor readings
AcuManage II available via wireless or AcuPort communication only
AcuPort
Connectivity
Ethernet, WiFi or RS422/485
Input/Output Modules
AK245 Quad 4-20mA/O-5VDC output
AK250 Quad 4-20mA/0-5VDC input
Acu-Trol
Absorb It
Controls the Acu-Trols Absorb It system for the use of CO
2
for optimal pH and alkalinity control
AKColor
Sensor
The AKColor colorimetric sensor system measures PPM of free chlorine with the DPD (N, N-DIETHYL-P-PHE NYLENEDIAMINE) test
Influent/Effluent Pressure Sensor
Pressure information for control of an automatic backwash
Optical Level Sensor
Measurement and automatic control of water level
Digital Flow Sensor
Displays flow rate in gallons per minute
Conductivity Sensor
Measurement of water TDS
Premounting
Mounted on easy to install polypropylene predrilled board
Serial Printer
On site printer capability with separate module
Features
Sensors
The AK600 sensors are capable of measuring ORP, pH, free chlorine, conductivity, temperature, flow rate and pressure.
Flow Cell
The AK1200 offers inlet and outlet valves for sensor protection and third outlet for ease of water sampling
Relays
Customized relay control for up to 96 combinations
Colorimetric Compatible
Compatible with the AKColor Colorimetric PPM sensing measurement system for free and total chlorine
Readings
The AK600 displays the Puckorius, Langelier or Ryzner indexes and differential influent and effluent pressure
Data Recording
In the absence of power, the AK600 will retain programming information, calibration, and recorded data
Alarms
Alarms are activated by sensor measurements and will communicate at two hour until alarm is cleared
Communication
The AK600 communicates using the AcuCom and AcuManage II. Software packages provides
wireless communication with modem modules.
Security
Password protected allows limited access
Convert this page to a PDF