Accu-Tab Chlorinating Systems

APEI is the leading PPG Specialist and authorized dealer and warranty station for ALL Accu-Tab PPG models.

 

A true plug-and-play, this pre-packaged system includes the Accu-Tab chlorinator, solution delivery pump, solution tank with float valve, flow meter, check valve, inlet and discharge control valves, solenoid valve for use with controllers, high-level switch, and pump contactor. The system requires only the piping in and out, a 110v power supply for the pump, and a 110v signal supply (such as from a chemical controller). The PowerBase system is available in four models: 1030, 3070AT, 3140AT, and 3500.

 

 

PowerBase 1030	PowerBase 3012AT	PowerBase 3070AT	PowerBase 3140AT	PowerBase 3500
Outdoor pools up to 40,000 gallons	Not recommended for Outdoor pools	Outdoor pools up to 80,000 gallons	Outdoor pools up to 250,000 gallons	Outdoor pools up to 1,000,000 gallons
Indoor pools up to 150,000 gallons	Indoor pools up to 75,000 gallons	Indoor pools up to 225,000 gallons	Indoor pools up to 500,000 gallons	Indoor pools up to 3,000,000 gallons
1.1 lb/hr chlorine feed rate	0.25 lb/hr chlorine feed rate	3.4 lb/hr chlorine feed rate	9.1 lb/hr chlorine feed rate	16.5 lb/hr chlorine feed rate
30-lb. tablet storage capacity	12-lb. tablet storage capacity	70-lb. tablet storage capacity	140-lb. tablet storage capacity	500-lb. tablet storage capacity
22" x 27" chlorinator footprint	20"x x29" chlorinator footprint	24" x 40" chlorinator footprint	24" x 43" chlorinator footprint	31" x 63" chlorinator footprint
1" inlet and outlet pioe	1" inlet and outlet pipe	1-1/2" inlet and outlet pipe	2" inlet and outlet pipe	2" inlet and outlet pipe
1 hp motor	1 hp motor	1-1/2 hp motor	1-1/2 hp motor	1-1/2 hp motor